octawall pro frames 80 mm for trade fairs
- Profile depth
- 80 mm
- Cladding
- fabric / panel
- Special
- LED video wall
- Use
- museum / exhibition
Textile. Panel. Video wall
Lightweight aluminium and just 80 mm deep: octawall pro means thoughtful design without compromise. With quick connectors, flush-mounted LED panels and concealed wiring, the frame system is ready for everything that needs to stand out. Whether at a trade fair, showroom or office, octawall pro adds shine to your ideas: efficient, modular and thoroughly top-class.
octawall pro in use
Added value
- Ready for content
- Vivid images and brilliant colours: flush-mounted LED panels and monitors add highlights to every trade fair stand.
- Time-saving assembly
- To make setup and dismantling quick and easy, the frames can be connected to one another completely without tools.
- Curved frames for more freedom
- Curved frames and rounded corner posts with wrap-around textile graphics: completely seamless for the largest possible advertising surface.
- Unbeatable in combination
- As usual, octawall pro can be easily combined with other octanorm systems, such as the octalumina or maxima light frames.
octawall pro in detail
Textile and panel
Textile and/or panels can be flush-mounted on both sides of the frames. The panels are held by a high-quality hook-and-loop tape, while the textile is held by a system of silicone edges and grooves.
Individual look: cladding panels
Panels spanning several frames create an individual look. They are hung on pre-installed perforated rails or supporting profiles.
Door element W 805
The universal door W 805 can be used as a left-hand (DIN) or right-hand (DIN) opening. The door element is flush-mounted and blends perfectly into the overall look.
Invisible wiring
A cable duct runs between two frames, so that cable management is invisible from the outside. Cables run where they are needed, without any additional drilling.
Connection with maxima 80
With the WP 1103 connector, maxima 80 profiles can be attached to octawall pro frames. The tensioning clips lock securely into both system grooves of the WP 860 profile.
Adaptable spacer bracket
The spacer bracket WP 860-Z10So can be installed between two frames to make use of every millimetre of floor space. And that without interrupting the textile groove.
Assemble your octawall pro frame now!
Need an octawall pro frame in a special format? No problem. With our configurator you adapt the frame size to your wishes. With just a few clicks you assemble your individual frame and precisely match it to the requirements of your project. To the octawall pro configurator.
octawall pro animation
LED video wallwow! wow! wow!
With structural calculation: for a strong appearance.
LED video wall
3 formats. 1 system
Three sets for a strong brand presentation. The substructure for LED walls in sizes from 2.5 x 1.5 m to 4.5 x 2.5 m creates a presentation surface in XXL format. And all this at a depth of just 0.5 m. A structural calculation is included with all video wall solutions. It not only contributes to visitor safety, but also provides additional planning certainty and makes coordination with local event organisers easier. LED video wall brochure.
LED video wall in detail
LED panels are easy to install
Simply insert LED tiles from recognised manufacturers between the frames and securely anchor them into the system groove with the appropriate hooks.
Invisible wiring
A cable duct runs between two frames, so that cable management is invisible from the outside. Cables run where they are needed, without any additional drilling.
Flush-mounted LED panels
Thanks to the 500-millimetre frame grid and the LED panel brackets, the system is compatible with LED panels from various manufacturers.
easy install kits
easy install kits. 4 sizes
A strong trade fair appearance is the result of perfect interplay between content, architecture and lighting. This is exactly what our easy install kits are designed for. LED panels from recognised manufacturers can be seamlessly integrated into the octawall pro frame system. Together with the octalux light profiles, a thoughtful exhibition stand solution is created. The kits are available in four sizes, from L 3 x W 3 x H 2.5 m to L 7 x W 4 x H 3.5 m, and can be upgraded to the next size. LED video wall brochure.
easy install kits in detail
Universal door W 805-SET
Each easy install kit has a separate room accessible through a door. The door can be fully covered and mounted on the left or right side, in accordance with DIN standards.
Light that draws attention
octalux light profiles put your exhibit in the right light. You can control them with a remote and create individual lighting moods that accentuate the entire exhibit.
octawall prolet's begin
Two kits to get started.
octawall pro starter kits
Two kits you can rearrange again and again. Thanks to the modular design, completely different space layouts can be created from the same frames. For even greater flexibility, you can expand the system at any time with additional octanorm systems, such as octalumina light frames.
octawall pro layout examples
set 1
set 2
References
More systems
maxima
A profile system for impactful brand presentations at fairs and events.
octalux
Illuminated profiles for retail, fairs and events.
octalumina
A light frame system for standout brand presentations.
octamax
A modular two-storey system for efficient use of space and stability.
octafloor
A load-bearing floor system for indoor and outdoor use.
octarig
Stable ceiling structure for hanging or free-standing setups.
octaclassic
A system of posts and beams for versatile presentation and fair constructions.
Door element W 805
octawall pro cladding panels
also see
- exhibition panelsQuality, durability, and versatility. Octanorm exhibition panels first appeared on the market in the 1970s and still impress businesses worldwide today. Thanks to their long service life they stand by you in good times and bad; they perform excellently as trade-fair equipment or as partition walls in interior design.
- maxima 120A heavyweight for large spans and heights up to 6 m. Ideal for large setups or structures that demand maximum load-bearing capacity.
- maxima 40The lightweight version of the series. Ideal for smaller exhibition stands, retail or displays. Slim, adaptable and easy to transport.
- maxima 80A balanced solution between stability and elegance. Perfect for medium-sized setups, retail spaces and effective brand presentations.
- octauniversalA universal solution for your unique needs: a sturdy construction for free-standing walls up to 6 m high at only 26 cm depth, maximising the use of space.
- octawall frames 40 mmReduced to just a few components, easy to plan and quick to assemble. With a fixed grid, universal doors and smart connectors. Ideal for smaller exhibition stands, museums or retail zones.
Specifications, lead time, regional availability.
contact
Let's prepare your trade-fair project.
Tell us what you need. We will prepare a technical proposal aligned with your space, deadline and system.
- call
- +386 590 56 301
- visit
- Gerbičeva 110
1000 Ljubljana
inquiry
Send us the basic information about your project. For a faster reply, include the fair location, the size of the exhibition space, the timeline and the desired system.
response time:We respond to inquiries within one business day, with a concept design and a ballpark quote.