skip to main content
Octanorm Adria

exhibition stand design in zagreb.

You have a space at the Zagreb Fair (Zagrebački velesajam) and a floor plan, and now someone has to design what stands on it. This guide follows a stand design for Zagreb from floor plan to 3D visualisation to build, shows which choices shape the result, and explains how to design a stand you can use again at the next fair.

what the organizer sets and what you decide

The organizer of each fair at the Zagreb Fair assigns the space. You receive a footprint and a stand type: inline, corner, peninsula or island. Power connections and any rules on build and height also come from the organizer. Ask for the exhibitor manual and the hall plan before you brief a designer, because every later choice starts from them.

What you decide is the message, the layout inside the footprint, the surfaces visitors see and the light. A stand design answers one question: what should a visitor understand from the aisle before deciding to walk in? Write that answer in one sentence before the first sketch. Layout, walls and graphics then follow from it.

  • Set by the organizer: footprint, stand type, connections, build rules.
  • Decided by you: message, layout, graphics, light, meeting area.
  • Ask in writing for the exhibitor manual and the hall plan.

A stand design answers one question: what should a visitor understand from the aisle before deciding to walk in?

- Octanorm Adria Editorial, Trade-fair stand specialistsOctanorm Adria d.o.o. · Octanorm Adria says

from floor plan to 3d visualisation

We design and visualise stands in-house. The sequence is the same for a small inline stand and a large island: you send the floor plan and a short brief, we propose a concept and show it in a 3D visualisation, you confirm it, and only then does the build start.

The floor plan carries the dimensions and the connection points. The brief says what you show, how many people work on the stand and whether you need a meeting area or storage. From these two documents we set out walls, counters, light and furniture. The 3D view lets you walk around the stand before anything is made.

For a standard single-storey stand, an enquiry two to three months before the fair leaves time for design, graphics printing and a calm build. Send the floor plan and the date and we will say whether a shorter deadline is realistic. Layout planning and the parts list are free before you decide.

  • Floor plan and brief: dimensions, connection points, what you show.
  • Concept with a 3D visualisation: walls, counters, light, furniture.
  • Your confirmation, then build from the Octanorm system.
  • Delivery, build before opening, dismantling and storage afterwards.

layout first: inline, corner, peninsula or island

The stand type shapes the design more than any finish. An inline stand has one open side, so the message goes on the back wall and the front stays open. A corner stand is open on two sides. A peninsula is open on three and an island on four, and every open side needs something worth looking at.

The second choice is open or closed. A closed area protects meetings and stock but hides the product. An open stand invites people in but has no quiet corner. A common answer is to split the footprint: the product or a counter at the open front, a closed room at the back for meetings and storage.

  • Inline: one open side, message on the back wall.
  • Corner: two open sides, two faces to design.
  • Peninsula and island: three or four open sides, no weak side.
  • Split plan: open front, closed meeting and storage room behind.

walls, light and height

Octawall and Maxima walls carry the graphics and set the proportions of the stand. Maxima profiles come in 40, 80 and 120 mm for larger spans and heavier loads. The wall is where the design is read from a distance, so it gets the largest graphic and the cleanest surface.

Octalumina backlit frames give an evenly lit fabric wall that reads across a hall, and light belongs in the design from the first sketch, because hall lighting is not aimed at your stand. Octarig carries lighting and signage overhead without loading the floor.

Where the footprint is small, Octamax adds a second level instead of more floor. Check the height and build rules for your fair with the organizer before the design depends on them.

  • Octawall and Maxima 40, 80 and 120 mm: walls, graphics, proportions.
  • Octalumina: evenly lit fabric wall for the stand name or the message.
  • Octarig: lighting and signage overhead, floor stays free.
  • Octamax: upper level, only after the height rules are confirmed.
Walls, light and height, Exhibition stand design in Zagreb

design a stand you can use again

A stand built from modular parts does not end with the fair. The same walls, frames and counters regroup for a different footprint, and only the graphics change. That changes the brief: ask for a layout that works at two sizes, with a core you keep and extra walls you add for a larger space.

Zagreb suits this because its calendar is broad. In our fair calendar the Zagreb Fair hosts CroAGRO and the Food and Healthy Living Fairs from 3 to 6 December 2026, Beauty & Hair Expo on 30 and 31 January 2027, the Zagreb hunting fair from 4 to 7 February 2027 and Nautika from 17 to 21 February 2027. Check each date with its organizer before you register.

Rental covers one appearance and leaves nothing to store. Purchase pays once Zagreb is a fixture in your calendar, because the cost per fair falls with every reuse. A hybrid is possible: your own core structure and rented extra elements for larger fairs.

  • Rental: one appearance, nothing to store.
  • Purchase: your own kit, later only new graphics and a new floor plan.
  • Hybrid: own core structure, rented extras for a larger space.
  • Next Zagreb dates: 3 to 6 December 2026, 30 and 31 January, 4 to 7 February and 17 to 21 February 2027.

delivery to zagreb and what we need for a proposal

Octanorm Adria is in Ljubljana, 140 km from Zagreb and inside the same customs union. The stand travels as an internal EU shipment, with no customs declaration and no ATA Carnet. A missing panel or a late change to a graphic is a same-day drive, so short-notice bookings for Zagreb are usually still possible.

We deliver, build before the opening and dismantle after the close, and we coordinate with the fair's technical services on power and build windows. Between fairs we can store the stand for you.

For a proposal send the floor plan or the stand size, the stand number if you have one, the stand type, what you show and the fair date. We plan the layout and quote the parts list before you decide, with rental and purchase side by side.

frequently asked questions

We design and visualise stands in-house and build them from the Octanorm modular system. You send the floor plan and a short brief, we propose a concept in 3D, you confirm it, and the build starts only after that.

For a standard single-storey stand, two to three months before the fair is enough for design, graphics printing and a calm build. With less time, send the floor plan and the date anyway and we will say what is realistic.

Yes. The concept is shown as a 3D visualisation so you can see the walls, counters and light before anything is made. The build starts after your confirmation.

For one fair, rent. If you exhibit in Zagreb several times a year, buying your own kit pays back, because later fairs need only a new floor plan and new graphics. A hybrid of your own core and rented extras also works.

No. Croatia is in the EU, so the stand moves from our warehouse in Ljubljana as an internal shipment, without a customs declaration or an ATA Carnet.

In our fair calendar: CroAGRO and the Food and Healthy Living Fairs from 3 to 6 December 2026, Beauty & Hair Expo on 30 and 31 January 2027, the Zagreb hunting fair from 4 to 7 February 2027 and Nautika from 17 to 21 February 2027. Check each date with its organizer before you register.

contact

Let's prepare your trade-fair project.

Tell us what you need. We will prepare a technical proposal aligned with your space, deadline and system.

visit
Gerbičeva ulica 110
1000 Ljubljana

inquiry

Send us the basic information about your project. For a faster reply, include the fair location, the size of the exhibition space, the timeline and the desired system.

response time:We respond to inquiries within one business day, with a concept design and a ballpark quote.

your details

We settle the details of the quote by phone.

We need it for the quote and the invoice.

your project

Briefly: which fair, what the stand is for, any special requests.

An approximate figure is enough; it lets us quote the right thing.

The date of the fair or the build.

Rent or buyoptional

area of interestoptional

PDF, images or 3D / CAD files (STL, STEP, OBJ, DWG, GLB ...). Up to 6 files, 25 MB per file.

consent

0/5completed